SEARCH SCALEAUTOMAG.COM

Enter keywords or a search phrase below:

Model King Two Much

August 2005
RELATED TOPICS: MODEL KING | 1/25 | DRAGSTER
Two Much
Model King no. 21489P
Model Type: Injection-molded styrene
Molded Colors: White
Scale: 1/25
MSRP: $15.00
Pros: Good display model
Cons: Flash on some parts, no mounting points for body
When building the Two Much twin-engine dragster, you can have it up on the wheels in short order to get a feel for how it is going to look. The one-piece body makes painting a lot easier.

The rubber tires supplied in the kit are good. It's nice to see big slicks in the back and motorcycle tires in the front. The wheels supplied are solid mags in the rear with spoke-style wheels (motorcycle) in the front.

The two Hemi engines go together well, although the two-piece headers were a bit of a challenge to hold together during assembly.

Because there are no positive locators for the engines, I slipped them into the frame until the transmission hit the rear differential. With the body on the frame, I then glued the engines to the frame.

I wanted to display the model with the body off, but the body wouldn't clear the engines and headers after I glued them to the frame.

The decals for the Two Much are minimal, and the usual assortment of sponsor decals is sparse. The stripes have to be laid out with fine-line tape; they're not supplied on the decal sheet.

Using the box art as reference, the body ended up painting nicely for a clean look.

JOIN THE DISCUSSION

Read and share your comments on this article
COMMENT ON THIS ARTICLE

Want to leave a comment?

Only registered members of ScaleAutoMag.com are allowed to leave comments. Registration is FREE and only takes a couple minutes.

Login or Register now.
0
FREE MONTHLY NEWSLETTER
SUBSCRIBER-ONLY CONTENT

CLAIM YOUR FREE GUIDE

50-plus great reader tips!