SEARCH SCALEAUTOMAG.COM

Enter keywords or a search phrase below:

Revell 1978 GMC "Big Game Country" Pickup

SCAKR1218_53
4x4s are gaining popularity in the modeling world, and Revell has jumped on the bandwagon with a proliferation of reissues, one of which is the subject of this review − the ’78 GMC “Big Game Country.” This kit was first tooled in 1978, and reissued in 1981 as the “High Roller.” It was subsequently reissued in 2012 with the addition of a snow plow, and this year as the “Big Game Country” pickup. There are 105 parts, large soft vinyl tires and a comprehensive decal sheet with gauges, camouflage, gas can and shock absorber markings, wheel hub logos, white animal silhouettes, and a windshield decal. No body badges.

As expected with age, there’s a bit of flash, heavy mold lines, and pin marks. The cab is a three-piece affair I glued the rear cab panel in place before painting. There are fairly prominent mold lines on the cab that need attention. There are ejector-pin marks on the radiator wall, the hood’s underside, and the bed’s underside that need to be dealt with for realism. The marker lights are molded in place, so you can paint them or use the supplied decals.
SCAKR1218_52
The bed features a movable tailgate, and after the assembly I found gaps in the rear between the bed and tailgate. I’m not sure if it was my fault or typical of this kit. The cab does not have a floor pan, and there are large holes in the firewall for the hood hinges. The truck’s engine is a nice GM small-block, and typical of 1970s and ’80s Monogram kits, is fairly simplified. The oil pan is molded to the block halves leaving a seam to sand. The starter, fuel pump, and oil filter are molded on while the distributor is molded to the intake. When building the transfer case remove the alignment pin near the round end. 

Moving on, its frame is nicely molded, some flash, but not too bad. It has molded-in fuel tanks with ejector-pin marks that need removal. The exhaust also is molded into place and has ejector-pin marks near the tips. The tips need to be drilled, and I feel are a bit under scale. Front and rear suspensions are basic, having axles, drive shafts and springs molded together. The differentials are molded open, and for realism should be filled. Eight shock absorbers all have fairly deep ejector-pin marks that need filling. They do not completely reach the springs. 
SCAKR1218_51
Sadly the wheels fit poorly with the tires and you’ll need to enlarge the axle retainer holes for the pins on the axles. Despite a nice dash, the interior is the weakest part of the kit. There is a nice steering column featuring both shift and turn signal levers, a chrome steering wheel, CB radio sans mic, and a 4WD selector. The seat is molded in place and there’s little door detail. Note the gun rack for the rear window. 

The chrome is nice, but the mirror faces have nasty pin marks. I stripped mine and made new faces from sheet plastic and Molotow Liquid Chrome. Apart from issues with the tires and shocks, plus no positive attachment for the cab and rudimentary attachment points for the bed, assembly was OK. The front bumper has weak attachment points, and both bumpers are marred by their attachment points to the sprue, fixed by a Molotow Liquid Chrome pen.

I did have minor issues with the camo decals conforming in a couple of places, but more time with setting solution would help. Although simplified the kit builds into a nice shelf model of a well-lifted 4x4. 

Due to the short reach of shocks, bad fit of tires and other assembly issues I mentioned I wouldn’t recommend this kit to a new or young modeler. It takes a bit of work to make this one contest worthy. -Lee Rilea
ScreenShot20181109at111226AM
Revell No. 85-7226
Molded Colors: White, clear, chrome
Scale: 1/24
MSRP: $22.95
Pros: Beautiful tires, nice decal sheet, looks the part
Cons: Simplified in key areas if you like detail, flash and ejector-pin marks are rampant, cannot be built stock, poor tire fit

JOIN THE DISCUSSION

Read and share your comments on this article
COMMENT ON THIS ARTICLE

Want to leave a comment?

Only registered members of ScaleAutoMag.com are allowed to leave comments. Registration is FREE and only takes a couple minutes.

Login or Register now.
0
Free guide

Free guide

Graft Jaguar and Mazda bodies
FREE MONTHLY NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our privacy policy